Characteristics and sound properties
The ARIA 2 is a small-sized 2-band shelf-top speaker system that uses two TI 100 8 Ohm high-end mid-bass units and the G 20 SC 8 Ohm dome tweeter. The unit is equally well suited to life as a satellite in a straightforward stereo system or for use in a multichannel set-up. It can be combined with larger speakers such as the VOX 200 where it takes over the centre or effect role or a full set of them can be used to cover all channels. The lower limiting frequency is at 75 Hz, i.e. deep-bass should be left to an active subwoofer and the satellites will need protecting with a high-pass section or, in multichannel systems, they should be run in small mode.
If the speakers are positioned right by the wall or in a shelving unit, the bass reflex tube will be partly damped or completely stifled, which can compensate for excessively boosted bass.
Technical Data: |
Rated power | 80 W |
Maximum power | 120 W |
Nominal impedance Z | 4 Ohm |
Frequency response | 75 - 30000 Hz |
Mean sound pressure level | 86 dB (1 W/1 m) |
Cut-off frequency | 2500 Hz |
Principle of Housing | Bassreflex |
Net volume | 8 l |
Outer dimension height | 396 mm |
Outer dimension width | 160 mm |
Outer dimension depth | 210 mm |
Component parts list for 1 box
The kit includes all necessary components (see list below). Cabinet parts are not included.
Tweeter | G 20 SC 8 Ohm | 1 pc. |
Woofer | TI 100 8 Ohm | 2 pcs. |
Crossover | Crossover ARIA 2 | 1 pc. |
Bass reflex tube | BR 6.8 (full length) | 2 pcs. |
Terminal | ST 77 | 1 pc. |
Damping material | Polyester wool | 0.5 bag |
Wood screws | 3.5 x 19 mm | 8 pcs. |
Countersunk screws | 3.5 x 25 mm | 8 pcs. |
Cable | 2 x 1.5 mm2 | 1 m |