Characteristics and sound properties
The CLOU is a slim-line 2-band column speaker offering real value-for-money as a key feature, as shown in the choice of two WS 17 E 8 Ohm for the low-to-medium frequencies and the SC 10 N 8 Ohm for the higher frequency range. To guarantee balanced overall sound quality using these less-expensive drivers, the two mid-bass units are physically separated from each other and each has its own enclosure. The lower WS 17 E 8 Ohm is mounted in a 36-litre compartment. This produces a uniform increase in the frequency response from 60 Hz up to 600 Hz. The upper WS 17 E 8 Ohm, on the other hand, is mounted in a smaller 16-litre compartment, which causes a slight increase in the range of frequencies between 60 Hz and 150 Hz. However, taken jointly, the two mid-bass units create a harmonious bass foundation which deliberately emphasises the frequencies between 60 Hz and 130 Hz. To ensure a seamless transition between the tweeter and the bass drivers, you need a properly balanced damping circuit to cut out any unwanted peaks and resonance.
The result of this unusual combination of drivers and cabinet is a column speaker that has to be seen and heard to be believed and one which produces a sound quality well above its moderate price range.
Technical Data: |
Rated power | 100 W |
Maximum power | 150 W |
Nominal impedance Z | 4 Ohm |
Frequency response | 38–20000 Hz |
Mean sound pressure level | 82 dB (1 W/1 m) |
Cut-off frequency | 3200 Hz |
Principle of Housing | geschlossen/ closed |
Net volume | 36 l + 16 l |
Outer dimension height | 1000 mm |
Outer dimension width | 220 mm |
Outer dimension depth | 320 mm |
Component parts list for 1 box
The kit includes all the components listed here but not the cabinet.
Tweeter | SC 10 N 8 Ohm | 1 pc. |
Woofer | WS 17 E 8 Ohm | 2 pcs. |
Crossover | Crossover CLOU | 1 pc. |
Terminal | ST 77 | 1 pc. |
Damping material | Polyester wool | 2 bags |
Wood screws | 3.5 x 19 mm | 12 pcs. |
Countersunk screws | 3.5 x 25 mm | 4 pcs. |
Cable | 2 x 1.5 mm² | 2.5 m |