Characteristics and sound properties
The ATLANTIS has been consistently designed for optimum sound-pressure rating while retaining a moderately sized cabinet and an elegant appearance. In the bass range, two AL 170 8 OHM are mounted in parallel but in separate housings, where each has about 27 l of air space to itself. These speakers have a lower limiting frequency of 28 Hz meaning that they generate good, solid deep bass. Where you position the speakers is more or less a matter of choice, but they should not be right against the wall (a minimum of 10 cm is needed) as otherwise the effect of the bass reflex tubes will suffer.
Compared with the 'normal' AL 130 8 OHM, the AL 130 M 8 OHM is equipped with a shorter voice coil. This improves efficiency and makes it the ideal choice in this combination.
Used as a tweeter, the KE 25 SC 8 Ohm is activated from 2500 Hz. The distortion factor of this ceramic dome driver is really low at these frequencies, so that even high volume levels come across completely free of distortion.
Technical Data:
|
Rated power | 140 W |
Maximum power | 200 W |
Nominal impedance Z | 4 Ohm |
Frequency response | 28–25000 Hz |
Mean sound pressure level | 86 dB (1 W/1 m) |
Cut-off frequency | 200/2500 Hz |
Principle of Housing | Bassreflex |
Net volume | 2 x 27 l + 7 l |
Outer dimension height | 1150 mm |
Outer dimension width | 230 mm |
Outer dimension depth | 370 mm |
Component parts list for 1 box
The kit includes all the components listed here but not the cabinet.
Tweeter | KE 25 SC 8 Ohm | 1 pc. |
Midrange | AL 130 M 8 Ohm | 1 pc. |
Woofers | AL 170 8 Ohm | 2 pcs. |
Crossover | Crossover Atlantis | 1 pc. |
Bass reflex tubes | BR 15.34 (full length) | 2 pcs. |
Terminal | BT 95/75 | 1 pc. |
Damping material | Polyester wool | 2.5 bags |
Special wood screws | 4 x 25 mm | 16 pcs. |
Countersunk screws | 3.5 x 25 mm | 4 pcs. |
Cable | 2 x 1.5 mm² | 2.5 m |
| 2 x 2.5 mm² | 2.5 m |