Characteristics and sound properties
The ALTO LINE MK II is a slim, 2-band column speaker with two 13 cm mid-bass units and one dome tweeter.
Due to its slim design and the correspondingly small footprint, this model is ideal as a free-standing speaker in smaller rooms.
The spatial separation is well handled by the speakers and can, as a result, produce clear sound characteristics even in "normal" living rooms.
The unusually broad range bass spectrum for a speaker of this size, that remains crisp even at higher output levels, is a point worthy of note.
As a result of its balanced, crisp sound characteristics, and the finely detailed, exuberant high-frequency output, the ALTO LINE MK II can be considered a fully-fledged member of the ALTO speaker family.
| Technical Data: |
|---|
| Rated power | 80 W |
| Maximum power | 130 W |
| Nominal impedance Z | 4 Ohm |
| Frequency response | 38–20000 Hz |
| Mean sound pressure level | 85 dB (1 W/1 m) |
| Cut-off frequency | 2300 Hz |
| Principle of Housing | Bassreflex |
| Net volume | 30 l |
| Outer dimension height | 900 mm |
| Outer dimension width | 190 mm |
| Outer dimension depth | 270 mm |
Component parts list for 1 box
The kit includes all necessary components (see list below). Cabinet parts are not included.
| Tweeter | DT 94 8 Ohm | 1 pc. |
| Bass-midrange driver | W 130 S 8 Ohm | 2 pcs. |
| Crossover | ALTO LINE MK II | |
| Bass reflex tube | BR 15.34 (length: 14.7 cm) | 1 pc. |
| Terminal | ST 77 | 1 pc. |
| Damping material | Polyester wool | 1.5 bags |
| Wood screws | 3.5 x 19 mm | 3 pcs. |
| Countersunk screws | 3.5 x 25 mm | 14 pcs. |
| Cable | 2 x 1.5 mm² | 2 m |
Deutsch
English