SOLO 50 PAIR

Product number: 5986

Fullrange speaker Kit

Weight: 9 kg
686,63 €
  inkl. 20% VAT.
Ready for shipping Delivery time: 7 - 9 Days

Characteristics and sound properties

The SOLO 50 applies the SOLO 100 concept to a more compact cabinet. This makes the units suitable for smaller rooms where the larger version would be too physically overpowering or the bass too powerful.

With a net volume of 50 litres, it is essential to have an internal resonance absorber as with the SOLO 100 owing to the Q-factor of the B 200 6 Ohm. This can also be used to fine-tune the bass reflex. The lower limiting frequency is not as low as with the SOLO 100 but is certainly sufficient for small to medium-sized rooms. The absorber must be carefully damped again.

The correcting circuitry is designed by analogy to the SOLO 100. If you replace the 15 ohm resistance with a 22 ohm, the increase in high-frequency frequency response will be eliminated and the result as measured in the measuring room was a well-balanced spectrum. Listening tests showed, however, that, as a result of the beaming effect of this wide-range speaker, a slight increase is beneficial in most listening environments.

 

Technical Data:
Rated power 40 W
Maximum power 70 W
Nominal impedance Z 6 Ohm
Frequency response 42–20000 Hz
Mean sound pressure level 88 dB (2,83 V/1 m)
Principle of Housing Bassreflex
Net volume 50 l
Outer dimension height 900 mm
Outer dimension width 260 mm
Outer dimension depth 300 mm

 

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet.
 

Fullrange speaker

B 200 6 Ohm

1 pc.
Crossover

Crossover SOLO 50/100

1 pc.
Terminal

High-End-Terminal

1 pc.
Bass reflex tube

BR 25.50 (full length)

1 pc.
Damping material

Polyester wool

2 bags
Woodscrews

4 x 25 mm

6 pcs.
Cable

2 x 2.5 mm²

1.5 m