Characteristics and sound properties
If you combine the NANO SAT MK II with the NANO SUB PR, you get a speaker system that is totally living-room friendly consisting of tiny satellites and a compact subwoofer which, all-in-all, sounds like a far larger, uncompromising column speaker set-up.
The BR 25.50 bass reflex tube with its flow-optimised, curved trumpet vent, contributes to the good overall sound of the subwoofer. The subwoofer cannot be located due to its 18 dB filter and separation at 150 Hz. A high-pass system and reflex balance enable the two tiny, magnetically screen satellites to produce remarkably dynamic sound. They can, therefore, also be used as centre or surround speakers for Surround systems at home.
Technical Data:
| |
|---|
| Rated power | 2 x 60 W |
| Maximum power | 2 x 90 W |
| Nominal impedance Z | 2 x 4 Ohm |
| Frequency response | 30–150 Hz |
| Mean sound pressure level | 85 dB
(2 x 2,83 V/1 m) |
| Cut-off frequency | 150 Hz |
| Principle of Housing | Bassreflex |
| Net volume | 39 l |
| Outer dimension height | 559 mm |
| Outer dimension width | 270 mm |
| Outer dimension depth | 420 mm |
Component parts list for 1 box
The kit includes all the components listed here but not the cabinet.
| Woofer | GF 200 2 x 4 Ohm | 1 pc. |
| Crossover | Crossover NANO SUB | |
| Bass reflex tube | BR 25.50 (full length) | 1 pc. |
| Terminal | BT 95/75 | 1 pc. |
| Damping material | Polyester wool | 1.5 bags |
| Frame dowels | | 8 pcs. |
| Wood screws | 4 x 20 mm | 10 pcs. |
| Countersunk screws | 3.5 x 25 mm | 4 pcs. |
| Cable | 2 x 1.5 mm² | 2 m |
| Material for covers | black, width 50 cm | 1 m |
Deutsch
English